Raymarine forum / Raymarine Forums / Instruments v / i50 depth not showing on es series display.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
i50 depth not showing on es series display.
08-20-17, 02:27 PM
Post: #1
dws90909 Offline
Junior Member
**
 		Posts: 3
Joined: Dec 2016
Reputation: 0
i50 depth not showing on es series display.
I have 2 es series displays. Just installed a i50 tri data and it seems to be working OK - except the data is not showing up on the es displays - even when the i50 is selected in the data sources menu.

The connections are all over the new seatalk - and the other instruments seem to be showing up fine on the es displays.

Is there something I'm missing here?
Find all posts by this user
Quote this message in a reply
08-21-17, 09:53 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: i50 depth not showing on es series display.
Welcome to the Raymarine Forum dws90909,

When the MFD is configured to display the Depth data item within a Databox displayed within the Chart application, is the depth reported as -.- or is a value reported.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication