Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] update to Axiom PRO
01-08-18, 02:54 PM (This post was last modified: 01-09-18 10:35 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] update to Axiom PRO
I have two E120 classics with seatalk HS on Bayliner 4788 , would like to install Two 12 inch Axiom pro . also will want to replace my Raytheon Radar with wi-fi radar. want to have have AIS hand set with remote for the fly-bridge also. Will need to have an adapter trim ring for lower station install in dash panel . Is their a factory assist for items required . Expect to pay $10,000+ for parts.
Find all posts by this user
Quote this message in a reply
01-09-18, 10:50 AM
Post: #2
RE: [CA] update to Axiom PRO
Welcome to the Raymarine Forum Gary,

Unfortunately, Raymarine has not produced a mounting plate for the E120 to Axiom Pro MFDs. The mounting template for the Axiom Pro 12 MFDs may be found here to permit you to have a custom mounting plate fabricated. Please click here to view a FAQ addressing options for surface mounting new electronics when no mounting plate adapter available from the manufacturer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)