Raymarine forum / Raymarine Forums / Radar v / [CA] Radar not picking up targets or waypoints

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Radar not picking up targets or waypoints
01-20-18, 12:05 PM (This post was last modified: 01-23-18 04:33 PM by Chuck - Raymarine - Moderator.)
Post: #1
Defiance Sportfishing Offline
Junior Member
**
 		Posts: 10
Joined: May 2016
Reputation: 0
[CA] Radar not picking up targets or waypoints
I have a Raymarine T92182 HD Dome. Mid fishing trip my radar stopped picking up targets (land and moving) as well as waypoints from my chart. I can here the unit running and have a green flashing light at networking switch. I've checked connections and all seem fine. The motherboard on radar was replaced three years ago. Has worked fine since. Thoughts?

Capt. Steve
Find all posts by this user
Quote this message in a reply
01-23-18, 04:33 PM (This post was last modified: 01-23-18 04:33 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Radar not picking up targets or waypoints
Welcome to the Raymarine Forum Steve,

Is the screen of the Radar application reporting that no scanner has been detected? Have you commanded the radar to Transmit?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication