Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] Transducer compatibility question

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Transducer compatibility question
02-09-18, 04:22 PM (This post was last modified: 02-09-18 04:50 PM by Chuck - Raymarine - Moderator.)
Post: #1
captz Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2017
Reputation: 0
[CA] Transducer compatibility question
I’m sure this has been answered somewhere before, but for the life of me I cant find any information on it.... any help would be greatly appreciated

Can you use an existing Raymarine M78713 depth transducer from the old ST-60+ Tridata with a new Dragonfly 5pro unit? I understand that the down vision and CHIRP will not work but all I am inserted in is the depth is this possible?

Thanks
Find all posts by this user
Quote this message in a reply
02-09-18, 04:49 PM (This post was last modified: 02-09-18 04:50 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Transducer compatibility question
Welcome to the Raymarine Forum captz,

Negative. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication