Raymarine forum / Raymarine Forums / Fishfinders v / [CA] CPT-100DVS Extension Cable

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] CPT-100DVS Extension Cable
03-17-18, 09:38 AM (This post was last modified: 03-19-18 08:42 AM by Chuck - Raymarine - Moderator.)
Post: #1
svalvasori Offline
Junior Member
**
 		Posts: 9
Joined: Mar 2018
Reputation: 0
[CA] CPT-100DVS Extension Cable
I understand from the CPT-100DVS installation manual that a 4mtr transducer extension cable is available - I am looking for the part number of this cable to ensure I purchase the correct one.

I would also like to know the required [censored] diameter to pass the transducer cable through the transom, I could not find it specified in the installation instructions.

Steve.
Find all posts by this user
Quote this message in a reply
03-19-18, 08:47 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] CPT-100DVS Extension Cable
Welcome to the Raymarine Forum Steve,

The correct part number for the 4m extension cable designed for use with any of the transducers found here is A80273.
Find all posts by this user
Quote this message in a reply
03-19-18, 10:34 AM
Post: #3
svalvasori Offline
Junior Member
**
 		Posts: 9
Joined: Mar 2018
Reputation: 0
RE: [CA] CPT-100DVS Extension Cable
Excellent, Thanks!
Find all posts by this user
Quote this message in a reply
03-19-18, 12:10 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] CPT-100DVS Extension Cable
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication