Raymarine forum / Raymarine Forums / Fishfinders v / [CA] C80 with DSM30 Connection Problems

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] C80 with DSM30 Connection Problems
03-20-18, 07:40 AM (This post was last modified: 03-21-18 01:43 PM by Chuck - Raymarine - Moderator.)
Post: #1
ronaldjallen Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2018
Reputation: 0
[CA] C80 with DSM30 Connection Problems
I'm using a C80 with a DSM30 and P79 transducer. The C80 reports depth info for about 5 seconds and then stops and gives a no input error. After about 1 min it repeats this pattern. My C80 software is the latest available v5.16.I have tried to update the DSM 30 software and it completes to 100% on all blue bars but then gives a blue screen software error at line 460.How do I update the DSM30 and will the update fix the problem?Thanks
Find all posts by this user
Quote this message in a reply
03-21-18, 01:19 PM (This post was last modified: 03-21-18 01:43 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] C80 with DSM30 Connection Problems
Welcome to the Raymarine Forum Ronald,

Please click here to view a FAQ addressing C-Series Classic MFD systems exhibiting these symptoms. As specified within the referenced FAQ, should the C-Series MFD's Fishfinder application plot be freezing or should the Fishfinder application report No Data Source or DSM Connection Lost, then please note that this problem cannot be corrected by updating the DSM's software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication