European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[CA] Radar in Sleep Mode
|
|
05-09-18, 04:21 PM
(This post was last modified: 05-11-18 01:25 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA] Radar in Sleep Mode
Equipment: Hybrid MFD Raymarine E127
Raymarine 18 Digital Radome Issue: Radar powers up but it will not rotate and complete going on. I think it is in "sleep mode" Do I turn off the electrical power while the unit is on so that it resets? Many thanks, Scodemac |
|||
|
|
05-11-18, 01:25 PM
(This post was last modified: 05-11-18 01:26 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: [CA] Radar in Sleep Mode
Welcome to the Raymarine Forum Scodemac,
The radome could quite possibly be in sleep mode. Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, should the problem persist after checking the loaded system voltage and then cycling power to the radome (see the reference to powering the radome via a dedicated switched power circuit), then the radome would be deemed to have suffered a circuitry failure necessitating that it be sent to Raymarine’s Product Repair Center to be bench checked / serviced. |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)