[CA] [CA11] Raymarine EV-150 work with Vulcan 7FS

[mbjezior]

Does anybody know if the Raymarine EV-150 will communicate with B&G Vulcan 7FS plotter?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum mbjezior,

Should the third party chartplotter have a NMEA 2000 communications interface then the third party chartplotter may be interfaced as a spur to the powered and properly terminated SeaTalkng / NMEA 2000 backbone which will interface the Evolution autopilot components to one another. Should the third party chartplotter have a NMEA 0183 communications interface then the third party chartplotter may be interfaced to a NMEA 0183 to NMEA 2000 data bridging device (ex. Actisense NGW-1-ISO-STNG) to which in turn would be interfaced as a spur to the powered and properly terminated SeaTalkng / NMEA 2000 backbone which will interface the Evolution autopilot components to one another.