Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG11] EV200 Sail + Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] EV200 Sail + Axiom
06-10-18, 01:29 PM (This post was last modified: 06-13-18 02:50 AM by Derek - Raymarine - Moderator.)
Post: #1
Remi.dk Offline
Junior Member
**
 		Posts: 3
Joined: Apr 2018
Reputation: 0
[DG11] EV200 Sail + Axiom
Is it posssible to setup and calibrate the autopilot without the P70 display, if you have the newest Lighthouse upgrades installed ?
Find all posts by this user
Quote this message in a reply
06-13-18, 02:55 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] EV200 Sail + Axiom
Hi Remi.dk

Thank you for your enquiry.

With version 3.4 software in AXIOM, you can fully calibrate an EV pilot and so no control unit is required.

Please note that the AXIOM will not enable access to the sailing features such as AUTO TACK or VANE mode.

regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication