Raymarine forum / Raymarine Forums / PC & Mobile v / [CA] [CA11] Waypoint transfer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Waypoint transfer
07-09-18, 07:37 AM (This post was last modified: 07-11-18 07:52 AM by Chuck - Raymarine - Moderator.)
Post: #1
Striper Marina Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2018
Reputation: 0
[CA11] Waypoint transfer
Im trying to convert the waypoints from an e 120 wide to a new unit. attached is the fsh file in trying to convert

I downloaded the fsh converter from you site but it wont convert them.

Thanks for the help

Tom Materne'
Striper Marina Inc
Find all posts by this user
Quote this message in a reply
07-11-18, 07:51 AM (This post was last modified: 07-11-18 07:52 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Waypoint transfer
Welcome to the Raymarine Forum Tom,

I encountered no problems when at all in having the Raymarine FSH to GPX Converter program produce a GPX file from your Archive.fsh file. Was your problem in producing a GPX file or having the MFD then import the GPX produced by the Raymarine FSH to GPX Converter program?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication