Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] e120 Depth Units are incorrect

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] e120 Depth Units are incorrect
08-13-18, 08:44 AM (This post was last modified: 08-17-18 09:45 AM by Chuck - Raymarine - Moderator.)
Post: #1
JoeDavin Offline
Junior Member
**
 		Posts: 3
Joined: Jul 2016
Reputation: 0
[CA11] e120 Depth Units are incorrect
When feet units are selected as the depth units, the chart is showing depth in fathoms. This continues even after cycling from fathoms back to feet and after restarting the system. Any suggestion on how to fix this.
Find all posts by this user
Quote this message in a reply
08-17-18, 09:45 AM (This post was last modified: 08-17-18 09:46 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] e120 Depth Units are incorrect
Welcome to the Raymarine Forum Joe,

What version of software is presently installed within your E-Series Classic MFD? What other devices is your MFD interfaced to?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication