Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom mfds do not share data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom mfds do not share data
08-13-18, 02:10 PM (This post was last modified: 08-17-18 02:59 PM by Chuck - Raymarine - Moderator.)
Post: #1
rkliever Offline
Junior Member
**
 		Posts: 7
Joined: Apr 2018
Reputation: 0
[CA11] Axiom mfds do not share data
I have two axiom mfds connected with raynet cables via an HS5. Both MFDs are recognized and when I select one to be the data master all data is erased from the other mfd. None of the data on the master is displayed on the other mfd. If I create a waypoint on the non-master mfd it shows up on the master but not on the mfd it was created on. How do I make data sharing work?
Find all posts by this user
Quote this message in a reply
08-17-18, 03:01 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom mfds do not share data
Welcome to the Raymarine Forum rkliever,

What version of LightHouse 3 software is installed within each of your MFDs (use the HOME->SET-UP command on each MFD)?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication