Raymarine forum / Raymarine Forums / General Discussions v / [CA] [CA11] Analog 1000 Tiller Pilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Analog 1000 Tiller Pilot
08-30-18, 02:52 PM (This post was last modified: 08-31-18 12:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
altairishgirl77 Offline
Junior Member
**
 		Posts: 1
Joined: Aug 2018
Reputation: 0
[CA11] Analog 1000 Tiller Pilot
I have a very old analog Tiller Pilot 1000. Does anyone know what the power consumption is supposed to be on it?
Find all posts by this user
Quote this message in a reply
08-31-18, 10:22 AM (This post was last modified: 08-31-18 12:45 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Analog 1000 Tiller Pilot
Welcome to the Raymarine Forum altairishgirl77,

I have no data on any tiller pilot produced prior to the ST1000 Tiller Pilot. The latter was designed to be powered from a 12V source. Power consumption for autopilots is variable based upon the frequency of steering corrections required to keep the vessel on the selected heading or course. Accordingly, power consumption is not quoted. The circuit supplying the ST1000 Tiller Pilot with power should be protected with a 12A fuse or 10A thermal breaker.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication