Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG] VDO rudder reference transducer and ACU100

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] VDO rudder reference transducer and ACU100
10-23-18, 04:59 AM (This post was last modified: 10-23-18 06:22 AM by Derek - Raymarine - Moderator.)
Post: #1
syfreedom Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2018
Reputation: 0
[DG] VDO rudder reference transducer and ACU100
Is the ACU100 capable of reading the output of the VDO rudder transducer?

If so, how should the two cables be connected to ACU100 terminals?

I believe the impedance is not right, but that's a matter of installing propriet resistors.

Regards, Matti
Find all posts by this user
Quote this message in a reply
10-23-18, 06:27 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG] VDO rudder reference transducer and ACU100
HI Matti,

The range of the VDO potentiometer is completely wrong and so it cannot be adapted or modified to be used. The only option is to use the Raymarine version.
Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication