Raymarine forum / Raymarine Forums / Instruments v / [TG] [TG11] Speed transducer parts

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Speed transducer parts
10-23-18, 05:11 PM (This post was last modified: 10-24-18 08:10 AM by Chuck - Raymarine - Moderator.)
Post: #1
GSwannell Offline
Junior Member
**
 		Posts: 5
Joined: Mar 2016
Reputation: 0
[TG11] Speed transducer parts
I have a through hull speed transducer which is quite old and it displays on the ST60 Tridata instrument. The rubber seal flap on the transducer no longer prevents lots of water coming in the hull when I remove the transducer for cleaning. Is it possible to buy a replacement rubber seal or even make one. Currently the boat is in the water so I cannot pullit apart to look at the arrangement.
Find all posts by this user
Quote this message in a reply
10-24-18, 09:16 PM
Post: #2
Tom - Raymarine - Moderator
Unregistered
 		 
RE: [TG11] Speed transducer parts
Hello GSwannell,

The Self Seal Transducer Service Kit contains a replacement flap-valve assembly, paddle-wheel and O-rings. It's part number D234 and you can order it through any Raymarine dealer

Regards,
Tom
Quote this message in a reply
10-26-18, 04:43 AM (This post was last modified: 10-26-18 07:55 AM by Chuck - Raymarine - Moderator.)
Post: #3
GSwannell Offline
Junior Member
**
 		Posts: 5
Joined: Mar 2016
Reputation: 0
RE: [TG11] Speed transducer parts
Thankyou very much Tom for this information. I will buy the serice kit.
Regards
Graham
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication