Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] evo 100 wheel pilot
12-05-18, 01:28 PM (This post was last modified: 12-05-18 01:41 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] evo 100 wheel pilot
Hi all, this is my first post. i just bought an evo 100 wheel pilot. the socket on the wheel pilot motor seems to be slack and turns slightly and when i lock the plug in it seems to be slack also Is it supposed to be like this?
Find all posts by this user
Quote this message in a reply
12-05-18, 03:02 PM
Post: #2
RE: [CA11] evo 100 wheel pilot
Welcome to the Raymarine Forum spycatcher,

The socket of the wheel drive is actually a hollow plastic rod having threads on it outer surface. The socket is secured to the drive via a round collar having female threads. This collar may be hand tightened (do not over-tighten) to remove the play which you have referenced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)