Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Sailing Laylines, Polars Etc.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Sailing Laylines, Polars Etc.
03-23-19, 12:29 PM (This post was last modified: 03-25-19 02:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
BobMack Offline
Junior Member
**
 		Posts: 5
Joined: Jul 2017
Reputation: 0
[CA11] Sailing Laylines, Polars Etc.
Installed a new Axiom 9 Pro system Last year. Immediately realized that the Advanced Sailing Tools (e.g Lay Lines, Polar Table inputs) available in Lighthouse ii were not available. Your FAQ's noted, and still note, they were to be added, and your sales staff at Defender show and support confirmed that.

Downloaded 3.8, but have not installed, but update manual makes no reference. Have these promised features been added? Status?
Find all posts by this user
Quote this message in a reply
03-25-19, 02:26 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Sailing Laylines, Polars Etc.
Welcome to the Raymarine Forum Bob,

Please click here to view a thread in which a colleague had recently addressed this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication