[CA] [CA11] What MFD to pair with a ES127
|
04-12-19, 07:06 AM
(This post was last modified: 04-12-19 09:10 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] What MFD to pair with a ES127
In the process of upgrading my electronics on my 05 26' Regulator. In addition to the new ES127 I have a CP470 and a new transducer. I do not have room for 2 12" screens and want a few suggestions that will pair well with the ES127. A 9" screen should fit. Thanks
|
|||
04-12-19, 09:11 AM
(This post was last modified: 04-12-19 09:13 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] What MFD to pair with a ES127
Welcome to the Raymarine Forum RKW68,
I would recommend that you consider an Axiom Pro S 9 MFD and that the eS127 MFD's software be updated to LightHouse 3 v3.8.105 or later. |
|||
04-12-19, 10:01 AM
(This post was last modified: 04-12-19 10:56 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [CA11] What MFD to pair with a ES127
Taking the budget into account, are there other options..
|
|||
04-12-19, 12:20 PM
Post: #4
|
|||
|
|||
RE: [CA11] What MFD to pair with a ES127
RKW68,
Other MFDs to be considered would be an Axiom 9 MFD (recommended) or an eS98 MFD. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)