Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] networking axioms

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] networking axioms
04-21-19, 04:00 PM (This post was last modified: 04-24-19 12:33 PM by Chuck - Raymarine - Moderator.)
Post: #1
Limestone45 Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2019
Reputation: 0
[CA11] networking axioms
Changing 2 C90 units for Axion 9. Connected with RayNet cable. Data Master is spurred to ST backbone.Do I terminate the Micro-c cable on the repeater Axiom, if so, with which fitting.
Find all posts by this user
Quote this message in a reply
04-24-19, 12:36 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] networking axioms
Welcome to the Raymarine Forum Limestone45,

Q. Do I terminate the Micro-c cable on the repeater Axiom?
A. Negative. As the NMEA 2000 port of repeater MFDs is not active, nothing need be done with the NMEA 2000 plug of the repeater MFD's Power/NMEA 2000 Cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication