Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Dragonfly dual station

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Dragonfly dual station
06-13-19, 05:41 AM (This post was last modified: 06-13-19 10:51 AM by Chuck - Raymarine - Moderator.)
Post: #1
GAB Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2019
Reputation: 0
[CA11] Dragonfly dual station
Hi. Can Raymarine supply “Y” piece wiring to allow moving Dragonfly 7Pro between upper and lower helm positions?
Thanks,
Graham
Find all posts by this user
Quote this message in a reply
06-13-19, 10:57 AM (This post was last modified: 06-13-19 10:58 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Dragonfly dual station
Welcome to the Raymarine Forum Graham,

Please note that production of Dragonfly products has ended. Dragonfly products were not designed for the application which you have inquired about. Accordingly, such accessories were not offered. For dual/multi-station applications, it would have been recommended that an CP100 DownVision Sounder Module w/DownVision Transducer, HS5 Network Switch, a compatible MFD (it need not have internal fishfinder circuitry (ex. a65, a75, eS75, Axiom) be installed onboard. An extra power and network cable would have additionally been recommended to permit the MFD to be moved between stations where it would communicate with the CP100 DownVision Sounder Module.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication