Threaded Mode | Linear Mode

OBG

I have a 2008 Legacy 32 with Raymarine electronics including radar, auto pilot, AIS, ST60 displays and an E120 MFD. Data comes from the original transducers and an Airmar weather station. There is also a Brookhouse multiplexer that sends location data to an iCOM VHF. The Raymarine equipment communicates over Seatalk.

Everything works fine.

The E120 is cumbersome to use. I'd like to replace the MFD with a modern unit for ease of use: switching between display modes.

What current MFD(s) can be swapped in to replace the E120?

Thanks.

***Chuck - Raymarine - Moderator*** · 06-13-19, 01:40 PM

Welcome to the Raymarine Forum OBG,

It would typically be recommended that an E120 MFD be replaced with an Axiom Pro S 12 or Axiom 12 MFD. Please click here and here respectivley to view the corresponding FAQs addressing this subject.