Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] drive not turning wheel

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] drive not turning wheel
06-22-19, 09:02 AM (This post was last modified: 06-24-19 12:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
Tombeau Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2018
Reputation: 0
[CA11] drive not turning wheel
Evolution autopilot. P70, ACU 100. All powered up. When I engage autopilot drive motor clicks but does not turn wheel. 12+ volts going into ACU, 6.5 volts to drive. Got new ACU 100 and just connected old wires. Same issue. What should I do next
Find all posts by this user
Quote this message in a reply
06-24-19, 12:28 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] drive not turning wheel
Welcome to the Raymarine Forum Tombeau,

With the drive unit's clutch disengaged, autopilot commanded into Auto mode, and then +10 is commanded, is the drive unit's motor turning?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication