Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] DST 800 and ST 60 with Seatalk to Seatalk NG Converter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] DST 800 and ST 60 with Seatalk to Seatalk NG Converter
07-31-19, 10:28 AM (This post was last modified: 08-02-19 02:40 PM by Chuck - Raymarine - Moderator.)
Post: #1
jsaronson Offline
Junior Member
**
 		Posts: 4
Joined: May 2016
Reputation: 0
[CA11] DST 800 and ST 60 with Seatalk to Seatalk NG Converter
I'd like to replace my speed only transducer with a DST 800. My instruments are ST60s. I have a Seatalk to NG converter already installed. Can I use a tri-ducer that is NG and get the data to the ST60s? Do you have the part number?
Find all posts by this user
Quote this message in a reply
08-02-19, 02:58 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] DST 800 and ST 60 with Seatalk to Seatalk NG Converter
Welcome to the Raymarine Forum jsaronson,

Raymarine offer the A22154, which is the analog variant of the DST800 transducer which may be used with the ST60/S60+ instments, as well as Raymarine's currently offered i50 instruments.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication