Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] cannot write (or read) from sd card

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] cannot write (or read) from sd card
07-31-19, 02:47 PM (This post was last modified: 08-02-19 03:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
Plarche Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2018
Reputation: 0
[CA11] cannot write (or read) from sd card
I have an Axiom 7 with the latest software update. When I use Navionics Protter sync to transfer routes to the Axiom (via wifi), nothing seems to write to the Navionics card. When I try to upload routes from Axiom to the card, I get a "Saving failed" error message (see attached). I have an activated Navionics Platinum plus card inserted. The unit can read the charts with no problem. Any suggestions?


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
08-02-19, 03:25 PM (This post was last modified: 08-02-19 03:26 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] cannot write (or read) from sd card
Welcome to the Raymarine Forum Plarche,

Which version of LightHouse 3 software is presently installed within your Axiom MFD? When the MFD's screen capture feature (POWER->TAKE SCREENSHOT) is used, are any errors reported? If another microSD memory card having a NTFS or FAT32 file system is inserted into the MFD's memory card reader and the screen capture feature is used, are errors reported?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication