European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[TG] B164 and DSM370 settings on a C90W
|
|
08-07-19, 07:21 PM
(This post was last modified: 08-15-19 11:28 PM by Tom - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
B164 and DSM370 settings on a C90W
On the C90W within the fish finder settings, what should the Speed Offset normally be set at?
Fish finder transducer settings: Select speed transducer... Auto Depth offset... 0.0 Speed offset... ???% Temperature offset... 0.0 |
|||
|
|
08-15-19, 11:31 PM
Post: #2
|
|||
|
|||
|
RE: B164 and DSM370 settings on a C90W
Hello Jett,
If you have a speed transducer connected to your CP370 (there's not one in the B164 and most people don't have one), this allows you to fine-tune the speed data to suit the water flow over your hull so that it reads correctly. This is a vessel-specific setting so there's no one right answer. If you don't have a speed transducer connected to the CP370 then this has no effect. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)