[TG] Element 9 HV Transducer

[brewvet63]

Looking for recommendations for a transducer for a Element 9 HV. I have a 30' Carver Flybridge with dual I/O's. I have the HV-100, would this work for this boat or would the HV-300TH single or pair be a better choice?

Thanks

[Tom - Raymarine - Moderator]

Hello brewvet63,

The I/Os are likely to block the SideVision/RealVision view out to either side, so if you can fit a through-hull transducer that's definitely going to give a better view out to the side. If you can fit a single transducer right on the centreline great, if not you'll need the split pair so that you can see each side. The split pair through-hulls will I think be what you need to end up with to get good performance.

Regards,
Tom