[JH] [JH11] Downgrade ES98 from Lighthouse III to Lighthouse II
|
09-05-19, 12:31 PM
(This post was last modified: 09-05-19 01:17 PM by John - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[JH11] Downgrade ES98 from Lighthouse III to Lighthouse II
My eS98 is running 3.10.42 - however, I find it to be almost unusable as the MFD is very slow.
This thread describes the downgrade path back to Lighthouse II: http://forum.raymarine.com/showthread.php?tid=6225 This thread points to 3.3.170 for Axiom MFD's (not atom-based MFD's like the eS). However, when I attempt to downgrade to the eS series 3.3.170 (found here https://raymarine.app.box.com/s/rvh9wwha...5842046120) the MFD tells me there is no software on the microSD. Before I brick my eS, is it correct to downgrade to 3.3.170 using the Axiom software? |
|||
09-05-19, 01:18 PM
Post: #2
|
|||
|
|||
RE: [JH11] Downgrade ES98 from Lighthouse III to Lighthouse II
You are able to go back to the Lighthouse II software. This is done by using the Version 19.03 Lighthouse II software found at the below Hyperlink.
Lighthouse II Best Regards John |
|||
09-05-19, 04:47 PM
Post: #3
|
|||
|
|||
RE: [JH11] Downgrade ES98 from Lighthouse III to Lighthouse II
(09-05-19 01:18 PM)John - Raymarine - Moderator Wrote: You are able to go back to the Lighthouse II software. This is done by using the Version 19.03 Lighthouse II software found at the below Hyperlink. Great thanks. Successful. |
|||
09-06-19, 07:47 AM
Post: #4
|
|||
|
|||
RE: [JH11] Downgrade ES98 from Lighthouse III to Lighthouse II
Your welcome!
John |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)