Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Change IP address??

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Change IP address??
10-04-19, 10:13 AM (This post was last modified: 10-04-19 10:41 AM by Chuck - Raymarine - Moderator.)
Post: #1
kencarr442 Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2018
Reputation: 0
[CA11] Change IP address??
I am building 3 small boat trainers, all on one network because they are all controlled by a single instructor station. Each trainer has 3 eS127 MFD's and 3 i70 Aux Displays. Since you can only have one Master MFD on a network, can I change the IP address on these Raymarine units so I can use VLAN to separate the data streams? Is there an advanced menu I can access?

Thanks,
Ken
Find all posts by this user
Quote this message in a reply
10-04-19, 10:42 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Change IP address??
Welcome to the Raymarine Forum Ken,

Unfortunately, it is not possible for end users to change the IP addresses of their Raymarine MFDs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication