Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] eS127 re-boot using LH 3

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] eS127 re-boot using LH 3
12-16-19, 11:02 PM
Post: #11
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] eS127 re-boot using LH 3
Thanks for the info, Nate. I don't have the answer for you myself just now, but will report the problem you're seeing and see what I can find out.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
12-17-19, 11:12 AM
Post: #12
nharrison5 Offline
Junior Member
**
 		Posts: 28
Joined: Jul 2016
Reputation: 0
RE: [TG11] eS127 re-boot using LH 3
Ok. I installed Cannes (3.11.42) and completed the last cruise of the season to home port. The trip was about 50 miles. I did not experience any MFD crashes on that limited trip.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication