[CA] [CA11] A98 with Lowrance Fuel Flow Sensor

[unixdood]

Hi,
I was reading an older thread on this discussion but didnt really answer my question. I was wondering if the Lowrance Fuel Flow Sensor (NMEA2K) will work with the A98 or the Axiom 9rv? Things I read was it "should" work but there is no way to change the PGN? to have 2 senders on the network unless you have a lowrance MFD to do so. Is this still the case? Are there any "supported/manufactured" raymarine fuel flow senders available?
thanks

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum unixdood,

Q. Things I read was it "should" work but there is no way to change the PGN? to have 2 senders on the network unless you have a lowrance MFD to do so. Is this still the case?
A. Yes, this remains the case. Please click here to view a FAQ addressing this subject. As indicated therein, Raymarine products are not designed to calibrate or configure (for instance ID, etc.) third party products ... including third party fuel flow sensors. Third party fuel flow sensors would need to be configured and calibrated in the manner specified by the sensor manufacturer. Should the sender then transmit PGN 127497 or 127489 then the MFD will display / utilize the corresponding data.