Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] [TG11] 300 Course Computer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] 300 Course Computer
05-15-20, 09:47 AM (This post was last modified: 05-19-20 11:39 PM by Tom - Raymarine - Moderator.)
Post: #1
richardsimpson63 Offline
Junior Member
**
 		Posts: 1
Joined: May 2020
Reputation: 0
[TG11] 300 Course Computer
How would I connect a 300 Course Computer to a NMEA Network
Find all posts by this user
Quote this message in a reply
05-19-20, 11:40 PM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] 300 Course Computer interfacing to NMEA
Hello Richard,

Is the pilot an old Type 300 or a modern EV-300 (or even a middle-aged SPX30)? When you say NMEA, do you mean NMEA0183 or NMEA2000?

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication