[CA] [CA11] Axiom Displaying no heading

[Annemi]

Hello

Greatings from Denmark

I have a similar problem. After updating my Axiom 9 to latest version 3.11.42 I keep getting the alarm "No Heading".
I have tried the factory reset, but the alarm keeps coming back.
Please advise if it is possible to download the previous 3.10.42 version, so that I can get rid of the error.

I have attached a scheme for information and the log file.

Thansk in advance.

Hans

[Chris - Raymarine - Moderator]

Hello Hans,

Is the STNG converter powered by Seatalk and STNG?

Chris,

[svgustovita]

I'm having the same issue. I was seeing the error every 20 seconds or so, then replaced my old Type 3 Course computer, fluxgate, ST6000+ with Evolution (ACU-400), P70s, ev-1. That seems to have elimated the "no heading" warning every 20 seconds. Now it only does it occasionally (once an hour or so). All software is up to date on all components. I have attached a drawing of my system. Please note: The diagram shows an ST600R mounted at the Binnacle. I haven't connected it to the system as I'm not sure it will work with the new Evolution. I'm hoping the new LH3 update will fix the no heading issue.

[Chris - Raymarine - Moderator]

Hello svgustovita,

I have sent a link,

[PFB]

I have the same problem, ever since installing the latest Lighthouse upgrade. Raymarine needs to fix whatever they changed.

[Chris - Raymarine - Moderator]

Hi PFB,

Please see the attached link for the V3.12 sw, https://www.raymarine.eu/service-and-sup...1593194423

Thank you,

Chris,