Raymarine forum / Raymarine Forums / Instruments v / Short Arm Wind Vane PT# E22078

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Short Arm Wind Vane PT# E22078
06-13-16, 05:15 PM
Post: #1
rwt1580006 Offline
Junior Member
**
 		Posts: 1
Joined: May 2016
Reputation: 0
Short Arm Wind Vane PT# E22078
I wish to perform a bench test of a short arm wind vane transducer. I understand there are five conductors - Power/Common/Sine/Cosine/Speed and I have read the mast head test thread. I will remove the transducer from the mast head and bring it down for a bench test. The base and cable will stay with the vessel. Is there a reference diagram of the connecter between the arm and the base such that I can correctly connect power/com and make readings on the remaining conductors? I know generally, Raymarine products are based on the Turck Eurofast line of connecters albeit with mechanical modifications.
Find all posts by this user
Quote this message in a reply
06-15-16, 02:49 PM (This post was last modified: 06-15-16 02:59 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Short Arm Wind Vane PT# E22078
Welcome to the Raymarine Forum rwt1580006,

Please click here to view a FAQ addressing this subject.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication