Raymarine forum / Raymarine Forums / Multifunction Displays v / Compatibility between CP100 and E classic MFD series

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Compatibility between CP100 and E classic MFD series
06-29-16, 01:24 PM
Post: #1
MS Aeromarine Offline
Junior Member
**
 		Posts: 15
Joined: Feb 2016
Reputation: 0
Compatibility between CP100 and E classic MFD series
Hello,

We have a costumer that has two E80 MFD connected to a DSM 300 sonar module throught a E55058 SThs switch, can we change the DSM 300 by a CP 100 sonar module? Is the CP 100 compatible with E classic series MFD?

Thanks for your answer,

Martin
Find all posts by this user
Quote this message in a reply
06-29-16, 01:27 PM (This post was last modified: 06-29-16 01:28 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Compatibility between CP100 and E classic MFD series
Martin,

The CP100 is not compatible with E-Series Classic MFDs ... the CP100 is exclusively compatible with the a/c/e/eS/gS-Series MFDs. Should the DSM300 not be operational, then it is recommended that it be replaced with an CP300 Sounder Module.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication