Raymarine forum / Raymarine Forums / Fishfinders v / Adding speed though water features to system supporting CHIRP/DownVision

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adding speed though water features to system supporting CHIRP/DownVision
11-01-16, 10:10 AM (This post was last modified: 01-10-17 03:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Adding speed though water features to system supporting CHIRP/DownVision
Adding speed though water features to system supporting CHIRP/DownVision

Unfortunately, Raymarine does not offer CHIRP/DownVison transducers which feature a speed through water transducer. However, it is possible to interface the MFD to any one of the following to add Speed through the water data to the system:
- an i40 Speed Instrument w/compatible thru-hull or transom mounted instrument Speed/Temp Transducer (requires SeaTalk to SeaTalkng Converter)
- an i40 BiData Instrument w/compatible thru-hull or transom mounted instrument Speed/Temp Transducer(s) (requires SeaTalk to SeaTalkng Converter)
- i50 Speed Instrument w/compatible thru-hull or transom mounted instrument Speed/Temp Transducer
- i50 Tridata Instrument w/compatible thru-hull or transom mounted instrument Speed/Temp Transducer(s)
- i70/i70S MFID and iTC-5 Analog Instrument Converter w/compatible thru-hull or transom mounted instrument Speed/Temp Transducer(s)
- i70/i70S MFID with DST-800 Smart Transducer

RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication