Raymarine forum / Raymarine Forums / Autopilots v / Drive Type for Lecomble and Schmitt

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Drive Type for Lecomble and Schmitt
10-31-16, 06:46 AM
Post: #1
cdiversions Offline
Junior Member
**
 		Posts: 10
Joined: Oct 2016
Reputation: 0
Drive Type for Lecomble and Schmitt
I have an ST70 controller. What is the correct drive type for my Lecomble and Schmitt drive? The actuator has two numbers: 38RL234709 and REF 22010961. The hydraulic pump has 38RL103209 and REF2201100D.

Thanks!
Find all posts by this user
Quote this message in a reply
11-01-16, 11:03 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Drive Type for Lecomble and Schmitt
Welcome to the Raymarine Forum cdiversions,

Unfortunately when Lecomble and Schmitt was searched, I was unable to locate any of the component numbers which you had provided within your thread. Please contact Lecomble and Schmitt to determine whether the parts specified are parts of a packaged hydraulic linear drive or separate autopilot hydraulic actuator and pump. Additionally, please request that Lecomble and Schmitt indicate the cubic capacity of the hydraulic actuator and peak flow rate of the hydraulic pump.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication