Raymarine forum / Raymarine Forums / Autopilots v / Course computer S3G AST

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Course computer S3G AST
04-23-17, 11:29 AM
Post: #1
Eder Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2016
Reputation: 0
Course computer S3G AST
I am buying back up parts for my Raymarine auto pilot for a Pacific crossing. The course computer is a S3G AST...I found one but the owner claims it requires 24v input power...are these not duel voltage? If not is there a way to make the 24v unit a suitable replacement? Thanks
Find all posts by this user
Quote this message in a reply
04-25-17, 12:42 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Course computer S3G AST
Welcome to the Raymarine Forum Eder,

Only one version of the S3G was produced. It was designed to be powered from a 12 or 24 VDC circuit. When interfaced to a 24 VDC system, a 24 VDC drive unit had to be mated to the S3G.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication