Displays not showing data on mn100 tacktic

[funandadventure]

Our mn100 system ('92) working fine when we bought last year minus the wind indicator. Previous owner could not make wind indicator work. We decided to try in the spring when boat out of water. We now cannot make any of the displays read(depth,speed, wind). We checked power and re ran the sequence in Health mode to no avail. Displays don't seem to be picking up info to display data. Suggestions? Thank you!

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum funandadventure,

It is recommended that you verify that you have charged the hull transmitter's battery. Should you have done so, and the problem persists, then it is recommended that the hull transmitter and displays be sent to Raymarine’s Product Repair Center to be bench checked / serviced.