Raymarine forum / Raymarine Forums / Multifunction Displays v / Axiom 7 mount

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 7 mount
06-05-17, 08:41 AM
Post: #1
Solo_Cam21 Offline
Junior Member
**
 		Posts: 17
Joined: Mar 2017
Reputation: 0
Axiom 7 mount
Hi Raymarine,


I'm looking to install a second screen Axiom but with limited dash room was considering mounting on top of my center console dash with the included mount. My concern is if I remove the unit and leave the power/nmea /network plugs exposed to weather elements I would have corrosion. Do you have any recommendations for me to protect my wiring if I mount this way, like a wire cover? I know my dragonfly wiring had wire caps on them but the Axiom doesn't. Or any recommendations of different mounts available?



Thank you
Find all posts by this user
Quote this message in a reply
06-05-17, 12:40 PM (This post was last modified: 03-21-18 02:42 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Axiom 7 mount
Welcome to the Raymarine Forum Solo_Cam21,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication