Raymarine forum / Raymarine Forums / Multifunction Displays v / Axiom 7 - Fuel Flow Sensors

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 7 - Fuel Flow Sensors
06-23-17, 05:02 PM
Post: #1
PotomacBob Offline
Junior Member
**
 		Posts: 2
Joined: Jun 2017
Reputation: 0
Axiom 7 - Fuel Flow Sensors
What are the recommended (or possible) fuel flow sensors that will work with the Axiom 7?
Find all posts by this user
Quote this message in a reply
06-26-17, 08:15 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Axiom 7 - Fuel Flow Sensors
Welcome to the Raymarine Forum Bob,

Raymarine does not recommend any specific manufacturer's fuel flow sensors. However, it is strongly recommended that a NMEA 2000 Certified sensor be chosen.
Please click here to view a related FAQ. As indicated within this FAQ, Calibration of third party sensors may require third party hardware (display, interface, etc.) and/or a PC with calibration software from the third party manufacturer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication