Raymarine forum / Raymarine Forums / Multifunction Displays v / E120 issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 issue
08-16-17, 12:06 AM (This post was last modified: 08-16-17 08:02 AM by Chuck - Raymarine - Moderator.)
Post: #1
dhong24 Offline
Junior Member
**
 		Posts: 5
Joined: Apr 2017
Reputation: 0
E120 issue
I have a couple issues that need some technical advice. I recently update E120 software to v5.69 and afterwards every time I start up my screen stays white shuts off if I leave my navionics platinum card in. If I take my card out it starts up properly then I just insert my navionics card back in. Is this normal??
Find all posts by this user
Quote this message in a reply
08-16-17, 08:07 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: E120 issue
Welcome to the Raymarine Forum dhong24,

The reported problem may be indicative of a issue with the MFD's memory card reader and/or with the chart card. You may want to consider testing the MFD with another chart card and/or after updating your chart card's contents. If using a Platinum Plus chart card, then please click here to view a FAQ addressing this subject. Should these recommendations have been followed and should the problem persist, then it would be recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication