Raymarine forum / Raymarine Forums / Instruments v / I60 wind voltage test

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
I60 wind voltage test
07-26-17, 02:42 PM (This post was last modified: 07-26-17 03:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
seabreeze Offline
Junior Member
**
 		Posts: 3
Joined: Jul 2016
Reputation: 0
I60 wind voltage test
Somewhere I've seen a chart that shows the dc voltage readings that should be measured between the various wires that are connected to the back of the i60. Red to common, yellow to common, etc. i can not locate this.
Thank you
Find all posts by this user
Quote this message in a reply
07-26-17, 03:02 PM (This post was last modified: 07-26-17 03:03 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: I60 wind voltage test
Welcome to the Raymarine Forum seabreeze,

I assume that you are trying to troubleshoot the i60 Wind Instrument's transducer.
If so, then please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication