Raymarine forum / Raymarine Forums / Communications v / Ray60 not getting position data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ray60 not getting position data
08-18-17, 08:53 AM (This post was last modified: 08-18-17 08:57 AM by Chuck - Raymarine - Moderator.)
Post: #11
ddfour1 Offline
Zamboati
***
 		Posts: 66
Joined: Feb 2016
Reputation: 0
RE: Ray60 not getting position data
Chuck: My course computer is an E22055 (1050013). Would that connect to the new MFD via a Seatalk to SeaTalkng Converter or via NMEA0183?

Thanks,

Dave
Find all posts by this user
Quote this message in a reply
08-18-17, 08:58 AM
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Ray60 not getting position data
Dave,

E22055 is the part number for a ST290 DPU ... it is not the part number for a Raymarine autopilot. The ST290 DPU would not be supported for use with any currently manufactured product.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication