Finding Transducer Model Numbers

[rsqunit]

Is there a way from the MFD (or some other means) to find out the model number and/or version of the transducers (wind, speed, temperature, depth) without visually inspecting the unit? Trying to avoid climbing up the mast, for example.

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum rsqunit,

Raymarine instrument depth and speed/temp transducers are manufactured with a tag affixed to transducer end of the affixed cable. This tag identifies the transducer. Wind transducers are not similarly tagged. If supplied with a photo of the wind transducer, then it may be possible to identify the model of wind transducer installed onboard.

[rsqunit]

Chuck, I posted a link to the picture for my wind transducer.

https://www.evernote.com/l/ABiLoq2w0v9JN...18vgKEJRhw

Thanks!

[Chuck - Raymarine - Moderator]

rsqunit,

The wind transducer shown within your photos is the Product Number: E22078 Short arm (300mm) vane w/30m cable or the E22079 Long arm (600mm) vane w/50m cable. It would correspondingly be necessary to measure the wind vane's arm to determine whether it was the long arm or short arm version of this wind transducer.