Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] only want to use sonar & navionics

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] only want to use sonar & navionics
01-22-18, 09:14 AM (This post was last modified: 01-22-18 04:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
Lee Offline
Junior Member
**
 		Posts: 6
Joined: May 2017
Reputation: 0
[CA] only want to use sonar & navionics
I have no use for applications other than subject. No radar, no engine data and etc. Only chart will be Navionics. How do I get away from all the clutter. For instance, I always run Heads Up but the unit constantly changes it to North Up when I switch from sonar to chart. Having two chart icons on the home screen plus the dual chart icon is not necessary for me. Is that part of my problem?
Find all posts by this user
Quote this message in a reply
01-22-18, 04:00 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] only want to use sonar & navionics
Welcome to the Raymarine Forum Lee,

What model of MFD have you installed onboard the vessel?
Find all posts by this user
Quote this message in a reply
01-23-18, 01:46 AM
Post: #3
Lee Offline
Junior Member
**
 		Posts: 6
Joined: May 2017
Reputation: 0
RE: [CA] only want to use sonar & navionics
(01-22-18 04:00 PM)Chuck - Raymarine - Moderator Wrote:  Welcome to the Raymarine Forum Lee,

What model of MFD have you installed onboard the vessel?

A98
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication