Raymarine forum / Raymarine Forums / Fishfinders v / [CA] Fairing block

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Fairing block
01-28-18, 07:20 AM (This post was last modified: 01-30-18 04:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
tugo Offline
Junior Member
**
 		Posts: 2
Joined: Dec 2017
Reputation: 0
[CA] Fairing block
is there available a fairing block for the dragonfly cpt 80 with 12 to 15 degree for through hull
Find all posts by this user
Quote this message in a reply
01-30-18, 04:05 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Fairing block
Welcome to the Raymarine Forum Tugo,

The fairing block supplied with the A80349 CPT-80 transducer is designed to support installation of this transducer on hulls having 0-25° of deadrise.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication