[CA] Using a Loran antenna with a VHF radio
|
03-10-18, 05:51 PM
(This post was last modified: 03-12-18 12:53 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA] Using a Loran antenna with a VHF radio
I removed a RayNav 520 from a boat we recently purchased. This is an old 1990 era Loran C unit so even though it functions, obviously not a useable item with the loran C system no longer broadcasting.
When removing it I noticed the antenna had the same coupling as a VHF antenna/radio and looks similar also. My question is this, is the antenna the same as a VHF antenna? Can it be used for a VHF Radio? I ask because I am mounting a VHF where the 520 was and that would be very convenient. |
|||
03-12-18, 12:52 PM
Post: #2
|
|||
|
|||
RE: [CA] Using a Loran antenna with a VHF radio
Welcome to the Raymarine Forum boardman74,
RF antennas are designed / tuned for operation within a specific range of frequencies based upon the device which they will be interfaced to. Loran signal was transmitted within the low frequency (160-180kHz) range while VHF transmits within the very high frequency (VHF) range (160-240MHz). Accordingly, it is not recommended that a Loran antenna be substituted for a VHF antenna for use with a VHF radio. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)