Raymarine forum / Raymarine Forums / General Discussions v / [CA] Replacing ST60 wind control head with an i60 control head?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Replacing ST60 wind control head with an i60 control head?
03-14-18, 03:31 PM (This post was last modified: 03-14-18 04:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
Rodboer Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2016
Reputation: 0
[CA] Replacing ST60 wind control head with an i60 control head?
Will the present wind vane work with the new i60 control head?
Find all posts by this user
Quote this message in a reply
03-14-18, 03:38 PM (This post was last modified: 03-14-18 04:20 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Replacing ST60 wind control head with an i60 control head?
Welcome to the Raymarine Forum Rodboer,

The i60 Wind instrument and the iTC-5 are designed for use with the same masthead wind transducer as had been designed for use with the ST60 and ST60+ Wind instruments (photo below).

[Image: wind.jpg]
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication