Raymarine forum / Raymarine Forums / Fishfinders v / Transducer Frequency for CHIRP/DownVision, SideVision and RealVision 3Dâ„¢ transducers

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transducer Frequency for CHIRP/DownVision, SideVision and RealVision 3Dâ„¢ transducers
04-06-16, 08:21 AM (This post was last modified: 02-19-19 04:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Transducer Frequency for CHIRP/DownVision, SideVision and RealVision 3Dâ„¢ transducers
Transducer Frequency for CHIRP/DownVision, SideVision, and RealVision 3Dâ„¢ transducers

DownVision transducer elements of transducers designed for use with Dragonfly displays, ax8 MFDs, eSx8 MFDs, CP100 DownVision Sounder Module and AXIOM RV chirp across a 60kHz range centered on 350kHz. SideVision transducer elements of transducers designed for use with CP200 SideVision Sounder Module AXIOM RV MFDs also chirp across a 60kHz range centered on 350kHz.

The CPT-S and CHIRP Conical sonar transducer elements of transducers designed use with Dragonfly displays, ax8 MFDs, eSx8 MFDs, CP100 and AXIOM MFDs chirp across a 60kHz range centered on 200kHz.

The side-side beam angle of the DownVision and SideVision transducer elements is 60 degrees. The fore-aft beam angle of the DownVision and SideVision transducer elements is a quite narrow ... approximately 1.4 degrees.


RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication