Raymarine forum / Raymarine Forums / Fishfinders v / [TG] RVX 1000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] RVX 1000
07-23-18, 03:35 PM (This post was last modified: 07-27-18 12:29 AM by Tom - Raymarine - Moderator.)
Post: #1
Daybreaker Offline
Mike Deto
**
 		Posts: 14
Joined: Mar 2016
Reputation: 0
RVX 1000
Do you need a separate ground wire on the RVX1000.If so where do I attach?I have one on my Axiom pros and CP470..Do you need one on the RVX1000 for possible interference? Thanks Capt.Mike
Visit this user's website Find all posts by this user
Quote this message in a reply
07-27-18, 12:31 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: RVX 1000
Hello Mike,

Yes, the drain wire in the RVX's power cable does definitely need to be connected to the boat's ground point: if in doubt, connect with black to battery negative.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication